使用子流程获取实时输出

I am trying to write a wrapper script for a command line program (svnadmin verify) that will display a nice progress indicator for the operation. This requires me to be able to see each line of output from the wrapped program as soon as it is output.

I figured that I’d just execute the program using subprocess.Popen, use stdout=PIPE, then read each line as it came in and act on it accordingly. However, when I ran the following code, the output appeared to be buffered somewhere, causing it to appear in two chunks, lines 1 through 332, then 333 through 439 (the last line of output)

from subprocess import Popen, PIPE, STDOUT

p = Popen('svnadmin verify /var/svn/repos/config', stdout = PIPE, 
        stderr = STDOUT, shell = True)
for line in p.stdout:
    print line.replace('\n', '')

After looking at the documentation on subprocess a little, I discovered the bufsize parameter to Popen, so I tried setting bufsize to 1 (buffer each line) and 0 (no buffer), but neither value seemed to change the way the lines were being delivered.

At this point I was starting to grasp for straws, so I wrote the following output loop:

while True:
    try:
        print p.stdout.next().replace('\n', '')
    except StopIteration:
        break

but got the same result.

Is it possible to get ‘realtime’ program output of a program executed using subprocess? Is there some other option in Python that is forward-compatible (not exec*)?

I tried this, and for some reason while the code

for line in p.stdout:
  ...

buffers aggressively, the variant

while True:
  line = p.stdout.readline()
  if not line: break
  ...

does not. Apparently this is a known bug: http://bugs.python.org/issue3907 (The issue is now “Closed” as of Aug 29, 2018)

p = subprocess.Popen(cmd, stdout=subprocess.PIPE, bufsize=1)
for line in iter(p.stdout.readline, b''):
    print line,
p.stdout.close()
p.wait()

You can direct the subprocess output to the streams directly. Simplified example:

subprocess.run(['ls'], stderr=sys.stderr, stdout=sys.stdout)

You can try this:

import subprocess
import sys

process = subprocess.Popen(
    cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE
)

while True:
    out = process.stdout.read(1)
    if out == '' and process.poll() != None:
        break
    if out != '':
        sys.stdout.write(out)
        sys.stdout.flush()

If you use readline instead of read, there will be some cases where the input message is not printed. Try it with a command the requires an inline input and see for yourself.

The Streaming subprocess stdin and stdout with asyncio in Python blog post by Kevin McCarthy shows how to do it with asyncio:

import asyncio
from asyncio.subprocess import PIPE
from asyncio import create_subprocess_exec


async def _read_stream(stream, callback):
    while True:
        line = await stream.readline()
        if line:
            callback(line)
        else:
            break


async def run(command):
    process = await create_subprocess_exec(
        *command, stdout=PIPE, stderr=PIPE
    )

    await asyncio.wait(
        [
            _read_stream(
                process.stdout,
                lambda x: print(
                    "STDOUT: {}".format(x.decode("UTF8"))
                ),
            ),
            _read_stream(
                process.stderr,
                lambda x: print(
                    "STDERR: {}".format(x.decode("UTF8"))
                ),
            ),
        ]
    )

    await process.wait()


async def main():
    await run("docker build -t my-docker-image:latest .")


if __name__ == "__main__":
    loop = asyncio.get_event_loop()
    loop.run_until_complete(main())

Real Time Output Issue resolved: I encountered a similar issue in Python, while capturing the real time output from C program. I added fflush(stdout); in my C code. It worked for me. Here is the code.

C program:

#include <stdio.h>
void main()
{
    int count = 1;
    while (1)
    {
        printf(" Count  %d\n", count++);
        fflush(stdout);
        sleep(1);
    }
}

Python program:

#!/usr/bin/python

import os, sys
import subprocess


procExe = subprocess.Popen(".//count", shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE, universal_newlines=True)

while procExe.poll() is None:
    line = procExe.stdout.readline()
    print("Print:" + line)

Output:

Print: Count  1
Print: Count  2
Print: Count  3

I ran into the same problem awhile back. My solution was to ditch iterating for the read method, which will return immediately even if your subprocess isn’t finished executing, etc.

Depending on the use case, you might also want to disable the buffering in the subprocess itself.

If the subprocess will be a Python process, you could do this before the call:

os.environ["PYTHONUNBUFFERED"] = "1"

Or alternatively pass this in the env argument to Popen.

Otherwise, if you are on Linux/Unix, you can use the stdbuf tool. E.g. like:

cmd = ["stdbuf", "-oL"] + cmd

See also here about stdbuf or other options.

(See also here for the same answer.)

I used this solution to get realtime output on a subprocess. This loop will stop as soon as the process completes leaving out a need for a break statement or possible infinite loop.

sub_process = subprocess.Popen(my_command, close_fds=True, shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE)

while sub_process.poll() is None:
    out = sub_process.stdout.read(1)
    sys.stdout.write(out)
    sys.stdout.flush()

Found this “plug-and-play” function here. Worked like a charm!

import subprocess

def myrun(cmd):
    """from http://blog.kagesenshi.org/2008/02/teeing-python-subprocesspopen-output.html
    """
    p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
    stdout = []
    while True:
        line = p.stdout.readline()
        stdout.append(line)
        print line,
        if line == '' and p.poll() != None:
            break
    return ''.join(stdout)

You may use an iterator over each byte in the output of the subprocess. This allows inline update (lines ending with ‘\r’ overwrite previous output line) from the subprocess:

from subprocess import PIPE, Popen

command = ["my_command", "-my_arg"]

# Open pipe to subprocess
subprocess = Popen(command, stdout=PIPE, stderr=PIPE)


# read each byte of subprocess
while subprocess.poll() is None:
    for c in iter(lambda: subprocess.stdout.read(1) if subprocess.poll() is None else {}, b''):
        c = c.decode('ascii')
        sys.stdout.write(c)
sys.stdout.flush()

if subprocess.returncode != 0:
    raise Exception("The subprocess did not terminate correctly.")

In Python 3.x the process might hang because the output is a byte array instead of a string. Make sure you decode it into a string.

Starting from Python 3.6 you can do it using the parameter encoding in Popen Constructor. The complete example:

process = subprocess.Popen(
    'my_command',
    stdout=subprocess.PIPE,
    stderr=subprocess.STDOUT,
    shell=True,
    encoding='utf-8',
    errors='replace'
)

while True:
    realtime_output = process.stdout.readline()

    if realtime_output == '' and process.poll() is not None:
        break

    if realtime_output:
        print(realtime_output.strip(), flush=True)

Note that this code redirects stderr to stdout and handles output errors.

Using pexpect with non-blocking readlines will resolve this problem. It stems from the fact that pipes are buffered, and so your app’s output is getting buffered by the pipe, therefore you can’t get to that output until the buffer fills or the process dies.

Complete solution:

import contextlib
import subprocess

# Unix, Windows and old Macintosh end-of-line
newlines = ['\n', '\r\n', '\r']
def unbuffered(proc, stream='stdout'):
    stream = getattr(proc, stream)
    with contextlib.closing(stream):
        while True:
            out = []
            last = stream.read(1)
            # Don't loop forever
            if last == '' and proc.poll() is not None:
                break
            while last not in newlines:
                # Don't loop forever
                if last == '' and proc.poll() is not None:
                    break
                out.append(last)
                last = stream.read(1)
            out = ''.join(out)
            yield out

def example():
    cmd = ['ls', '-l', '/']
    proc = subprocess.Popen(
        cmd,
        stdout=subprocess.PIPE,
        stderr=subprocess.STDOUT,
        # Make all end-of-lines '\n'
        universal_newlines=True,
    )
    for line in unbuffered(proc):
        print line

example()

This is the basic skeleton that I always use for this. It makes it easy to implement timeouts and is able to deal with inevitable hanging processes.

import subprocess
import threading
import Queue

def t_read_stdout(process, queue):
    """Read from stdout"""

    for output in iter(process.stdout.readline, b''):
        queue.put(output)

    return

process = subprocess.Popen(['dir'],
                           stdout=subprocess.PIPE,
                           stderr=subprocess.STDOUT,
                           bufsize=1,
                           cwd='C:\\',
                           shell=True)

queue = Queue.Queue()
t_stdout = threading.Thread(target=t_read_stdout, args=(process, queue))
t_stdout.daemon = True
t_stdout.start()

while process.poll() is None or not queue.empty():
    try:
        output = queue.get(timeout=.5)

    except Queue.Empty:
        continue

    if not output:
        continue

    print(output),

t_stdout.join()

(This solution has been tested with Python 2.7.15)
You just need to sys.stdout.flush() after each line read/write:

while proc.poll() is None:
    line = proc.stdout.readline()
    sys.stdout.write(line)
    # or print(line.strip()), you still need to force the flush.
    sys.stdout.flush()

Few answers suggesting python 3.x or pthon 2.x , Below code will work for both.

 p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT,)
    stdout = []
    while True:
        line = p.stdout.readline()
        if not isinstance(line, (str)):
            line = line.decode('utf-8')
        stdout.append(line)
        print (line)
        if (line == '' and p.poll() != None):
            break