Python 实用宝典

Question 1

If you have a Colormap cmap, for example:

cmap = matplotlib.cm.get_cmap('Spectral')

How can you get a particular colour out of it between 0 and 1, where 0 is the first colour in the map and 1 is the last colour in the map?

Ideally, I would be able to get the middle colour in the map by doing:

>>> do_some_magic(cmap, 0.5) # Return an RGBA tuple
(0.1, 0.2, 0.3, 1.0)

Question 2

You can do this with the code below, and the code in your question was actually very close to what you needed, all you have to do is call the cmap object you have.

import matplotlib

cmap = matplotlib.cm.get_cmap('Spectral')

rgba = cmap(0.5)
print(rgba) # (0.99807766255210428, 0.99923106502084169, 0.74602077638401709, 1.0)

For values outside of the range [0.0, 1.0] it will return the under and over colour (respectively). This, by default, is the minimum and maximum colour within the range (so 0.0 and 1.0). This default can be changed with cmap.set_under() and cmap.set_over().

For “special” numbers such as np.nan and np.inf the default is to use the 0.0 value, this can be changed using cmap.set_bad() similarly to under and over as above.

Finally it may be necessary for you to normalize your data such that it conforms to the range [0.0, 1.0]. This can be done using matplotlib.colors.Normalize simply as shown in the small example below where the arguments vmin and vmax describe what numbers should be mapped to 0.0 and 1.0 respectively.

import matplotlib

norm = matplotlib.colors.Normalize(vmin=10.0, vmax=20.0)

print(norm(15.0)) # 0.5

A logarithmic normaliser (matplotlib.colors.LogNorm) is also available for data ranges with a large range of values.

(Thanks to both Joe Kington and tcaswell for suggestions on how to improve the answer.)

Question 3

In order to get rgba integer value instead of float value, we can do

rgba = cmap(0.5,bytes=True)

So to simplify the code based on answer from Ffisegydd, the code would be like this:

#import colormap
from matplotlib import cm

#normalize item number values to colormap
norm = matplotlib.colors.Normalize(vmin=0, vmax=1000)

#colormap possible values = viridis, jet, spectral
rgba_color = cm.jet(norm(400),bytes=True) 

#400 is one of value between 0 and 1000

Question 4

To build on the solutions from Ffisegydd and amaliammr, here’s an example where we make CSV representation for a custom colormap:

#! /usr/bin/env python3
import matplotlib
import numpy as np 

vmin = 0.1
vmax = 1000

norm = matplotlib.colors.Normalize(np.log10(vmin), np.log10(vmax))
lognum = norm(np.log10([.5, 2., 10, 40, 150,1000]))

cdict = {
    'red':
    (
        (0., 0, 0),
        (lognum[0], 0, 0),
        (lognum[1], 0, 0),
        (lognum[2], 1, 1),
        (lognum[3], 0.8, 0.8),
        (lognum[4], .7, .7),
    (lognum[5], .7, .7)
    ),
    'green':
    (
        (0., .6, .6),
        (lognum[0], 0.8, 0.8),
        (lognum[1], 1, 1),
        (lognum[2], 1, 1),
        (lognum[3], 0, 0),
        (lognum[4], 0, 0),
    (lognum[5], 0, 0)
    ),
    'blue':
    (
        (0., 0, 0),
        (lognum[0], 0, 0),
        (lognum[1], 0, 0),
        (lognum[2], 0, 0),
        (lognum[3], 0, 0),
        (lognum[4], 0, 0),
    (lognum[5], 1, 1)
    )
}


mycmap = matplotlib.colors.LinearSegmentedColormap('my_colormap', cdict, 256)   
norm = matplotlib.colors.LogNorm(vmin, vmax)
colors = {}
count = 0
step_size = 0.001
for value in np.arange(vmin, vmax+step_size, step_size):
    count += 1
    print("%d/%d %f%%" % (count, vmax*(1./step_size), 100.*count/(vmax*(1./step_size))))
    rgba = mycmap(norm(value), bytes=True)
    color = (rgba[0], rgba[1], rgba[2])
    if color not in colors.values():
        colors[value] = color

print ("value, red, green, blue")
for value in sorted(colors.keys()):
    rgb = colors[value]
    print("%s, %s, %s, %s" % (value, rgb[0], rgb[1], rgb[2]))

Question 5

For completeness these are the cmap choices I encountered so far:

Accent, Accent_r, Blues, Blues_r, BrBG, BrBG_r, BuGn, BuGn_r, BuPu, BuPu_r, CMRmap, CMRmap_r, Dark2, Dark2_r, GnBu, GnBu_r, Greens, Greens_r, Greys, Greys_r, OrRd, OrRd_r, Oranges, Oranges_r, PRGn, PRGn_r, Paired, Paired_r, Pastel1, Pastel1_r, Pastel2, Pastel2_r, PiYG, PiYG_r, PuBu, PuBuGn, PuBuGn_r, PuBu_r, PuOr, PuOr_r, PuRd, PuRd_r, Purples, Purples_r, RdBu, RdBu_r, RdGy, RdGy_r, RdPu, RdPu_r, RdYlBu, RdYlBu_r, RdYlGn, RdYlGn_r, Reds, Reds_r, Set1, Set1_r, Set2, Set2_r, Set3, Set3_r, Spectral, Spectral_r, Wistia, Wistia_r, YlGn, YlGnBu, YlGnBu_r, YlGn_r, YlOrBr, YlOrBr_r, YlOrRd, YlOrRd_r, afmhot, afmhot_r, autumn, autumn_r, binary, binary_r, bone, bone_r, brg, brg_r, bwr, bwr_r, cividis, cividis_r, cool, cool_r, coolwarm, coolwarm_r, copper, copper_r, cubehelix, cubehelix_r, flag, flag_r, gist_earth, gist_earth_r, gist_gray, gist_gray_r, gist_heat, gist_heat_r, gist_ncar, gist_ncar_r, gist_rainbow, gist_rainbow_r, gist_stern, gist_stern_r, gist_yarg, gist_yarg_r, gnuplot, gnuplot2, gnuplot2_r, gnuplot_r, gray, gray_r, hot, hot_r, hsv, hsv_r, inferno, inferno_r, jet, jet_r, magma, magma_r, nipy_spectral, nipy_spectral_r, ocean, ocean_r, pink, pink_r, plasma, plasma_r, prism, prism_r, rainbow, rainbow_r, seismic, seismic_r, spring, spring_r, summer, summer_r, tab10, tab10_r, tab20, tab20_r, tab20b, tab20b_r, tab20c, tab20c_r, terrain, terrain_r, twilight, twilight_r, twilight_shifted, twilight_shifted_r, viridis, viridis_r, winter, winter_r

Python 实用宝典

从Matplotlib的颜色图中获取单个颜色

问题：从Matplotlib的颜色图中获取单个颜色

回答 0

回答 1

回答 2

回答 3

有趣好用的Python教程