>>> a=[1,2,3]
>>> a.remove(2)
>>> a
[1, 3]
>>> a=[1,2,3]
>>> del a[1]
>>> a
[1, 3]
>>> a= [1,2,3]
>>> a.pop(1)
2
>>> a
[1, 3]
>>> 

Is there any difference between the above three methods to remove an element from a list?

Yes, remove removes the first matching value, not a specific index:

>>> a = [0, 2, 3, 2]
>>> a.remove(2)
>>> a
[0, 3, 2]

del removes the item at a specific index:

>>> a = [9, 8, 7, 6]
>>> del a[1]
>>> a
[9, 7, 6]

and pop removes the item at a specific index and returns it.

>>> a = [4, 3, 5]
>>> a.pop(1)
3
>>> a
[4, 5]

Their error modes are different too:

>>> a = [4, 5, 6]
>>> a.remove(7)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ValueError: list.remove(x): x not in list
>>> del a[7]
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
IndexError: list assignment index out of range
>>> a.pop(7)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
IndexError: pop index out of range

Use del to remove an element by index, pop() to remove it by index if you need the returned value, and remove() to delete an element by value. The latter requires searching the list, and raises ValueError if no such value occurs in the list.

When deleting index i from a list of n elements, the computational complexities of these methods are

del     O(n - i)
pop     O(n - i)
remove  O(n)

Since no-one else has mentioned it, note that del (unlike pop) allows the removal of a range of indexes because of list slicing:

>>> lst = [3, 2, 2, 1]
>>> del lst[1:]
>>> lst
[3]

This also allows avoidance of an IndexError if the index is not in the list:

>>> lst = [3, 2, 2, 1]
>>> del lst[10:]
>>> lst
[3, 2, 2, 1]

Already answered quite well by others. This one from my end :)

Evidently, pop is the only one which returns the value, and remove is the only one which searches the object, while del limits itself to a simple deletion.

Many best explanations are here but I will try my best to simplify more.

Among all these methods, reverse & pop are postfix while delete is prefix.

remove(): It used to remove first occurrence of element

remove(i) => first occurrence of i value

>>> a = [0, 2, 3, 2, 1, 4, 6, 5, 7]
>>> a.remove(2)   # where i = 2
>>> a
[0, 3, 2, 1, 4, 6, 5, 7]

pop(): It used to remove element if:

unspecified

pop() => from end of list

>>>a.pop()
>>>a
[0, 3, 2, 1, 4, 6, 5]

specified

pop(index) => of index

>>>a.pop(2)
>>>a
[0, 3, 1, 4, 6, 5]

WARNING: Dangerous Method Ahead

delete(): Its a prefix method.

Keep an eye on two different syntax for same method: [] and (). It possesses power to:

1.Delete index

del a[index] => used to delete index and its associated value just like pop.

>>>del a[1]
>>>a
[0, 1, 4, 6, 5]

2.Delete values in range [index 1:index N]

del a[0:3] => multiple values in range

>>>del a[0:3]
>>>a
[6, 5]

3.Last but not list, to delete whole list in one shot

del (a) => as said above.

>>>del (a)
>>>a

Hope this clarifies the confusion if any.

pop – Takes Index and returns Value

remove – Takes value, removes first occurrence, and returns nothing

delete – Takes index, removes value at that index, and returns nothing

Any operation/function on different data structures is defined for particular actions. Here in your case i.e. removing an element, delete, Pop and remove. (If you consider sets, Add another operation – discard) Other confusing case is while adding. Insert/Append. For Demonstration, Let us Implement deque. deque is a hybrid linear data structure, where you can add elements / remove elements from both ends.(Rear and front Ends)

class Deque(object):

  def __init__(self):

    self.items=[]

  def addFront(self,item):

    return self.items.insert(0,item)
  def addRear(self,item):

    return self.items.append(item)
  def deleteFront(self):

    return self.items.pop(0)
  def deleteRear(self):
    return self.items.pop()
  def returnAll(self):

    return self.items[:]

In here, see the operations:

def deleteFront(self):

    return self.items.pop(0)
def deleteRear(self):
    return self.items.pop()

Operations have to return something. So, pop – With and without an index. If I don’t want to return the value: del self.items[0]

Delete by value not Index:

• remove :

  list_ez=[1,2,3,4,5,6,7,8]
  for i in list_ez:
      if i%2==0:
          list_ez.remove(i)
  print list_ez
  

Returns [1,3,5,7]

let us consider the case of sets.

set_ez=set_ez=set(range(10))

set_ez.remove(11)

# Gives Key Value Error. 
##KeyError: 11

set_ez.discard(11)

# Does Not return any errors.

While pop and delete both take indices to remove an element as stated in above comments. A key difference is the time complexity for them. The time complexity for pop() with no index is O(1) but is not the same case for deletion of last element.

If your use case is always to delete the last element, it’s always preferable to use pop() over delete(). For more explanation on time complexities, you can refer to https://www.ics.uci.edu/~pattis/ICS-33/lectures/complexitypython.txt

The remove operation on a list is given a value to remove. It searches the list to find an item with that value and deletes the first matching item it finds. It is an error if there is no matching item, raises a ValueError.

>>> x = [1, 0, 0, 0, 3, 4, 5]
>>> x.remove(4)
>>> x
[1, 0, 0, 0, 3, 5]
>>> del x[7]
Traceback (most recent call last):
  File "<pyshell#1>", line 1, in <module>
    del x[7]
IndexError: list assignment index out of range

The del statement can be used to delete an entire list. If you have a specific list item as your argument to del (e.g. listname[7] to specifically reference the 8th item in the list), it’ll just delete that item. It is even possible to delete a “slice” from a list. It is an error if there index out of range, raises a IndexError.

>>> x = [1, 2, 3, 4]
>>> del x[3]
>>> x
[1, 2, 3]
>>> del x[4]
Traceback (most recent call last):
  File "<pyshell#1>", line 1, in <module>
    del x[4]
IndexError: list assignment index out of range

The usual use of pop is to delete the last item from a list as you use the list as a stack. Unlike del, pop returns the value that it popped off the list. You can optionally give an index value to pop and pop from other than the end of the list (e.g listname.pop(0) will delete the first item from the list and return that first item as its result). You can use this to make the list behave like a queue, but there are library routines available that can provide queue operations with better performance than pop(0) does. It is an error if there index out of range, raises a IndexError.

>>> x = [1, 2, 3] 
>>> x.pop(2) 
3 
>>> x 
[1, 2]
>>> x.pop(4)
Traceback (most recent call last):
  File "<pyshell#1>", line 1, in <module>
    x.pop(4)
IndexError: pop index out of range

See collections.deque for more details.

Remove basically works on the value . Delete and pop work on the index

Remove basically removes the first matching value. Delete deletes the item from a specific index Pop basically takes an index and returns the value at that index. Next time you print the list the value doesnt appear.

You can also use remove to remove a value by index as well.

n = [1, 3, 5]

n.remove(n[1])

n would then refer to [1, 5]