Python中是否有`string.split（）`的生成器版本？

string.split() returns a list instance. Is there a version that returns a generator instead? Are there any reasons against having a generator version?

It is highly probable that re.finditer uses fairly minimal memory overhead.

def split_iter(string):
    return (x.group(0) for x in re.finditer(r"[A-Za-z']+", string))

Demo:

>>> list( split_iter("A programmer's RegEx test.") )
['A', "programmer's", 'RegEx', 'test']

edit: I have just confirmed that this takes constant memory in python 3.2.1, assuming my testing methodology was correct. I created a string of very large size (1GB or so), then iterated through the iterable with a for loop (NOT a list comprehension, which would have generated extra memory). This did not result in a noticeable growth of memory (that is, if there was a growth in memory, it was far far less than the 1GB string).

The most efficient way I can think of it to write one using the offset parameter of the str.find() method. This avoids lots of memory use, and relying on the overhead of a regexp when it’s not needed.

[edit 2016-8-2: updated this to optionally support regex separators]

def isplit(source, sep=None, regex=False):
    """
    generator version of str.split()

    :param source:
        source string (unicode or bytes)

    :param sep:
        separator to split on.

    :param regex:
        if True, will treat sep as regular expression.

    :returns:
        generator yielding elements of string.
    """
    if sep is None:
        # mimic default python behavior
        source = source.strip()
        sep = "\\s+"
        if isinstance(source, bytes):
            sep = sep.encode("ascii")
        regex = True
    if regex:
        # version using re.finditer()
        if not hasattr(sep, "finditer"):
            sep = re.compile(sep)
        start = 0
        for m in sep.finditer(source):
            idx = m.start()
            assert idx >= start
            yield source[start:idx]
            start = m.end()
        yield source[start:]
    else:
        # version using str.find(), less overhead than re.finditer()
        sepsize = len(sep)
        start = 0
        while True:
            idx = source.find(sep, start)
            if idx == -1:
                yield source[start:]
                return
            yield source[start:idx]
            start = idx + sepsize

This can be used like you want…

>>> print list(isplit("abcb","b"))
['a','c','']

While there is a little bit of cost seeking within the string each time find() or slicing is performed, this should be minimal since strings are represented as continguous arrays in memory.

This is generator version of split() implemented via re.search() that does not have the problem of allocating too many substrings.

import re

def itersplit(s, sep=None):
    exp = re.compile(r'\s+' if sep is None else re.escape(sep))
    pos = 0
    while True:
        m = exp.search(s, pos)
        if not m:
            if pos < len(s) or sep is not None:
                yield s[pos:]
            break
        if pos < m.start() or sep is not None:
            yield s[pos:m.start()]
        pos = m.end()


sample1 = "Good evening, world!"
sample2 = " Good evening, world! "
sample3 = "brackets][all][][over][here"
sample4 = "][brackets][all][][over][here]["

assert list(itersplit(sample1)) == sample1.split()
assert list(itersplit(sample2)) == sample2.split()
assert list(itersplit(sample3, '][')) == sample3.split('][')
assert list(itersplit(sample4, '][')) == sample4.split('][')

EDIT: Corrected handling of surrounding whitespace if no separator chars are given.

Did some performance testing on the various methods proposed (I won’t repeat them here). Some results:

• str.split (default = 0.3461570239996945
• manual search (by character) (one of Dave Webb’s answer’s) = 0.8260340550004912
• re.finditer (ninjagecko’s answer) = 0.698872097000276
• str.find (one of Eli Collins’s answers) = 0.7230395330007013
• itertools.takewhile (Ignacio Vazquez-Abrams’s answer) = 2.023023967998597
• str.split(..., maxsplit=1) recursion = N/A†

†The recursion answers (string.split with maxsplit = 1) fail to complete in a reasonable time, given string.splits speed they may work better on shorter strings, but then I can’t see the use-case for short strings where memory isn’t an issue anyway.

Tested using timeit on:

the_text = "100 " * 9999 + "100"

def test_function( method ):
    def fn( ):
        total = 0

        for x in method( the_text ):
            total += int( x )

        return total

    return fn

This raises another question as to why string.split is so much faster despite its memory usage.

Here is my implementation, which is much, much faster and more complete than the other answers here. It has 4 separate subfunctions for different cases.

I’ll just copy the docstring of the main str_split function:

str_split(s, *delims, empty=None)

Split the string s by the rest of the arguments, possibly omitting empty parts (empty keyword argument is responsible for that). This is a generator function.

When only one delimiter is supplied, the string is simply split by it. empty is then True by default.

str_split('[]aaa[][]bb[c', '[]')
    -> '', 'aaa', '', 'bb[c'
str_split('[]aaa[][]bb[c', '[]', empty=False)
    -> 'aaa', 'bb[c'

When multiple delimiters are supplied, the string is split by longest possible sequences of those delimiters by default, or, if empty is set to True, empty strings between the delimiters are also included. Note that the delimiters in this case may only be single characters.

str_split('aaa, bb : c;', ' ', ',', ':', ';')
    -> 'aaa', 'bb', 'c'
str_split('aaa, bb : c;', *' ,:;', empty=True)
    -> 'aaa', '', 'bb', '', '', 'c', ''

When no delimiters are supplied, string.whitespace is used, so the effect is the same as str.split(), except this function is a generator.

str_split('aaa\\t  bb c \\n')
    -> 'aaa', 'bb', 'c'

import string

def _str_split_chars(s, delims):
    "Split the string `s` by characters contained in `delims`, including the \
    empty parts between two consecutive delimiters"
    start = 0
    for i, c in enumerate(s):
        if c in delims:
            yield s[start:i]
            start = i+1
    yield s[start:]

def _str_split_chars_ne(s, delims):
    "Split the string `s` by longest possible sequences of characters \
    contained in `delims`"
    start = 0
    in_s = False
    for i, c in enumerate(s):
        if c in delims:
            if in_s:
                yield s[start:i]
                in_s = False
        else:
            if not in_s:
                in_s = True
                start = i
    if in_s:
        yield s[start:]


def _str_split_word(s, delim):
    "Split the string `s` by the string `delim`"
    dlen = len(delim)
    start = 0
    try:
        while True:
            i = s.index(delim, start)
            yield s[start:i]
            start = i+dlen
    except ValueError:
        pass
    yield s[start:]

def _str_split_word_ne(s, delim):
    "Split the string `s` by the string `delim`, not including empty parts \
    between two consecutive delimiters"
    dlen = len(delim)
    start = 0
    try:
        while True:
            i = s.index(delim, start)
            if start!=i:
                yield s[start:i]
            start = i+dlen
    except ValueError:
        pass
    if start<len(s):
        yield s[start:]


def str_split(s, *delims, empty=None):
    """\
Split the string `s` by the rest of the arguments, possibly omitting
empty parts (`empty` keyword argument is responsible for that).
This is a generator function.

When only one delimiter is supplied, the string is simply split by it.
`empty` is then `True` by default.
    str_split('[]aaa[][]bb[c', '[]')
        -> '', 'aaa', '', 'bb[c'
    str_split('[]aaa[][]bb[c', '[]', empty=False)
        -> 'aaa', 'bb[c'

When multiple delimiters are supplied, the string is split by longest
possible sequences of those delimiters by default, or, if `empty` is set to
`True`, empty strings between the delimiters are also included. Note that
the delimiters in this case may only be single characters.
    str_split('aaa, bb : c;', ' ', ',', ':', ';')
        -> 'aaa', 'bb', 'c'
    str_split('aaa, bb : c;', *' ,:;', empty=True)
        -> 'aaa', '', 'bb', '', '', 'c', ''

When no delimiters are supplied, `string.whitespace` is used, so the effect
is the same as `str.split()`, except this function is a generator.
    str_split('aaa\\t  bb c \\n')
        -> 'aaa', 'bb', 'c'
"""
    if len(delims)==1:
        f = _str_split_word if empty is None or empty else _str_split_word_ne
        return f(s, delims[0])
    if len(delims)==0:
        delims = string.whitespace
    delims = set(delims) if len(delims)>=4 else ''.join(delims)
    if any(len(d)>1 for d in delims):
        raise ValueError("Only 1-character multiple delimiters are supported")
    f = _str_split_chars if empty else _str_split_chars_ne
    return f(s, delims)

This function works in Python 3, and an easy, though quite ugly, fix can be applied to make it work in both 2 and 3 versions. The first lines of the function should be changed to:

def str_split(s, *delims, **kwargs):
    """...docstring..."""
    empty = kwargs.get('empty')

No, but it should be easy enough to write one using itertools.takewhile().

EDIT:

Very simple, half-broken implementation:

import itertools
import string

def isplitwords(s):
  i = iter(s)
  while True:
    r = []
    for c in itertools.takewhile(lambda x: not x in string.whitespace, i):
      r.append(c)
    else:
      if r:
        yield ''.join(r)
        continue
      else:
        raise StopIteration()

I don’t see any obvious benefit to a generator version of split(). The generator object is going to have to contain the whole string to iterate over so you’re not going to save any memory by having a generator.

If you wanted to write one it would be fairly easy though:

import string

def gsplit(s,sep=string.whitespace):
    word = []

    for c in s:
        if c in sep:
            if word:
                yield "".join(word)
                word = []
        else:
            word.append(c)

    if word:
        yield "".join(word)

I wrote a version of @ninjagecko’s answer that behaves more like string.split (i.e. whitespace delimited by default and you can specify a delimiter).

def isplit(string, delimiter = None):
    """Like string.split but returns an iterator (lazy)

    Multiple character delimters are not handled.
    """

    if delimiter is None:
        # Whitespace delimited by default
        delim = r"\s"

    elif len(delimiter) != 1:
        raise ValueError("Can only handle single character delimiters",
                        delimiter)

    else:
        # Escape, incase it's "\", "*" etc.
        delim = re.escape(delimiter)

    return (x.group(0) for x in re.finditer(r"[^{}]+".format(delim), string))

Here are the tests I used (in both python 3 and python 2):

# Wrapper to make it a list
def helper(*args,  **kwargs):
    return list(isplit(*args, **kwargs))

# Normal delimiters
assert helper("1,2,3", ",") == ["1", "2", "3"]
assert helper("1;2;3,", ";") == ["1", "2", "3,"]
assert helper("1;2 ;3,  ", ";") == ["1", "2 ", "3,  "]

# Whitespace
assert helper("1 2 3") == ["1", "2", "3"]
assert helper("1\t2\t3") == ["1", "2", "3"]
assert helper("1\t2 \t3") == ["1", "2", "3"]
assert helper("1\n2\n3") == ["1", "2", "3"]

# Surrounding whitespace dropped
assert helper(" 1 2  3  ") == ["1", "2", "3"]

# Regex special characters
assert helper(r"1\2\3", "\\") == ["1", "2", "3"]
assert helper(r"1*2*3", "*") == ["1", "2", "3"]

# No multi-char delimiters allowed
try:
    helper(r"1,.2,.3", ",.")
    assert False
except ValueError:
    pass

python’s regex module says that it does “the right thing” for unicode whitespace, but I haven’t actually tested it.

Also available as a gist.

If you would also like to be able to read an iterator (as well as return one) try this:

import itertools as it

def iter_split(string, sep=None):
    sep = sep or ' '
    groups = it.groupby(string, lambda s: s != sep)
    return (''.join(g) for k, g in groups if k)

Usage

>>> list(iter_split(iter("Good evening, world!")))
['Good', 'evening,', 'world!']

more_itertools.split_at offers an analog to str.split for iterators.

>>> import more_itertools as mit


>>> list(mit.split_at("abcdcba", lambda x: x == "b"))
[['a'], ['c', 'd', 'c'], ['a']]

>>> "abcdcba".split("b")
['a', 'cdc', 'a']

more_itertools is a third-party package.

I wanted to show how to use the find_iter solution to return a generator for given delimiters and then use the pairwise recipe from itertools to build a previous next iteration which will get the actual words as in the original split method.

from more_itertools import pairwise
import re

string = "dasdha hasud hasuid hsuia dhsuai dhasiu dhaui d"
delimiter = " "
# split according to the given delimiter including segments beginning at the beginning and ending at the end
for prev, curr in pairwise(re.finditer("^|[{0}]+|$".format(delimiter), string)):
    print(string[prev.end(): curr.start()])

note:

1. I use prev & curr instead of prev & next because overriding next in python is a very bad idea
2. This is quite efficient

Dumbest method, without regex / itertools:

def isplit(text, split='\n'):
    while text != '':
        end = text.find(split)

        if end == -1:
            yield text
            text = ''
        else:
            yield text[:end]
            text = text[end + 1:]

def split_generator(f,s):
    """
    f is a string, s is the substring we split on.
    This produces a generator rather than a possibly
    memory intensive list. 
    """
    i=0
    j=0
    while j<len(f):
        if i>=len(f):
            yield f[j:]
            j=i
        elif f[i] != s:
            i=i+1
        else:
            yield [f[j:i]]
            j=i+1
            i=i+1

here is a simple response

def gen_str(some_string, sep):
    j=0
    guard = len(some_string)-1
    for i,s in enumerate(some_string):
        if s == sep:
           yield some_string[j:i]
           j=i+1
        elif i!=guard:
           continue
        else:
           yield some_string[j:]