Is this the cleanest way to write a list to a file, since writelines() doesn’t insert newline characters?

file.writelines(["%s\n" % item  for item in list])

It seems like there would be a standard way…

You can use a loop:

with open('your_file.txt', 'w') as f:
    for item in my_list:
        f.write("%s\n" % item)

In Python 2, you can also use

with open('your_file.txt', 'w') as f:
    for item in my_list:
        print >> f, item

If you’re keen on a single function call, at least remove the square brackets [], so that the strings to be printed get made one at a time (a genexp rather than a listcomp) — no reason to take up all the memory required to materialize the whole list of strings.

What are you going to do with the file? Does this file exist for humans, or other programs with clear interoperability requirements?

If you are just trying to serialize a list to disk for later use by the same python app, you should be pickleing the list.

import pickle

with open('outfile', 'wb') as fp:
    pickle.dump(itemlist, fp)

To read it back:

with open ('outfile', 'rb') as fp:
    itemlist = pickle.load(fp)

The simpler way is:

with open("outfile", "w") as outfile:
    outfile.write("\n".join(itemlist))

You could ensure that all items in item list are strings using a generator expression:

with open("outfile", "w") as outfile:
    outfile.write("\n".join(str(item) for item in itemlist))

Remember that all itemlist list need to be in memory, so, take care about the memory consumption.

Using Python 3 and Python 2.6+ syntax:

with open(filepath, 'w') as file_handler:
    for item in the_list:
        file_handler.write("{}\n".format(item))

This is platform-independent. It also terminates the final line with a newline character, which is a UNIX best practice.

Starting with Python 3.6, "{}\n".format(item) can be replaced with an f-string: f"{item}\n".

Yet another way. Serialize to json using simplejson (included as json in python 2.6):

>>> import simplejson
>>> f = open('output.txt', 'w')
>>> simplejson.dump([1,2,3,4], f)
>>> f.close()

If you examine output.txt:

[1, 2, 3, 4]

This is useful because the syntax is pythonic, it’s human readable, and it can be read by other programs in other languages.

I thought it would be interesting to explore the benefits of using a genexp, so here’s my take.

The example in the question uses square brackets to create a temporary list, and so is equivalent to:

file.writelines( list( "%s\n" % item for item in list ) )

Which needlessly constructs a temporary list of all the lines that will be written out, this may consume significant amounts of memory depending on the size of your list and how verbose the output of str(item) is.

Drop the square brackets (equivalent to removing the wrapping list() call above) will instead pass a temporary generator to file.writelines():

file.writelines( "%s\n" % item for item in list )

This generator will create newline-terminated representation of your item objects on-demand (i.e. as they are written out). This is nice for a couple of reasons:

• Memory overheads are small, even for very large lists
• If str(item) is slow there’s visible progress in the file as each item is processed

This avoids memory issues, such as:

In [1]: import os

In [2]: f = file(os.devnull, "w")

In [3]: %timeit f.writelines( "%s\n" % item for item in xrange(2**20) )
1 loops, best of 3: 385 ms per loop

In [4]: %timeit f.writelines( ["%s\n" % item for item in xrange(2**20)] )
ERROR: Internal Python error in the inspect module.
Below is the traceback from this internal error.

Traceback (most recent call last):
...
MemoryError

(I triggered this error by limiting Python’s max. virtual memory to ~100MB with ulimit -v 102400).

Putting memory usage to one side, this method isn’t actually any faster than the original:

In [4]: %timeit f.writelines( "%s\n" % item for item in xrange(2**20) )
1 loops, best of 3: 370 ms per loop

In [5]: %timeit f.writelines( ["%s\n" % item for item in xrange(2**20)] )
1 loops, best of 3: 360 ms per loop

(Python 2.6.2 on Linux)

Because i’m lazy….

import json
a = [1,2,3]
with open('test.txt', 'w') as f:
    f.write(json.dumps(a))

#Now read the file back into a Python list object
with open('test.txt', 'r') as f:
    a = json.loads(f.read())

Serialize list into text file with comma sepparated value

mylist = dir()
with open('filename.txt','w') as f:
    f.write( ','.join( mylist ) )

In General

Following is the syntax for writelines() method

fileObject.writelines( sequence )

Example

#!/usr/bin/python

# Open a file
fo = open("foo.txt", "rw+")
seq = ["This is 6th line\n", "This is 7th line"]

# Write sequence of lines at the end of the file.
line = fo.writelines( seq )

# Close opend file
fo.close()

Reference

http://www.tutorialspoint.com/python/file_writelines.htm

file.write('\n'.join(list))

with open ("test.txt","w")as fp:
   for line in list12:
       fp.write(line+"\n")

You can also use the print function if you’re on python3 as follows.

f = open("myfile.txt","wb")
print(mylist, file=f)

Why don’t you try

file.write(str(list))

This logic will first convert the items in list to string(str). Sometimes the list contains a tuple like

alist = [(i12,tiger), 
(113,lion)]

This logic will write to file each tuple in a new line. We can later use eval while loading each tuple when reading the file:

outfile = open('outfile.txt', 'w') # open a file in write mode
for item in list_to_persistence:    # iterate over the list items
   outfile.write(str(item) + '\n') # write to the file
outfile.close()   # close the file 

Another way of iterating and adding newline:

for item in items:
    filewriter.write(f"{item}" + "\n")

In python>3 you can use print and * for argument unpacking:

with open("fout.txt", "w") as fout:
    print(*my_list, sep="\n", file=fout)

In Python3 You Can use this loop

with open('your_file.txt', 'w') as f:
    for item in list:
        f.print("", item)

Let avg be the list, then:

In [29]: a = n.array((avg))
In [31]: a.tofile('avgpoints.dat',sep='\n',dtype = '%f')

You can use %e or %s depending on your requirement.

poem = '''\
Programming is fun
When the work is done
if you wanna make your work also fun:
use Python!
'''
f = open('poem.txt', 'w') # open for 'w'riting
f.write(poem) # write text to file
f.close() # close the file

How It Works: First, open a file by using the built-in open function and specifying the name of the file and the mode in which we want to open the file. The mode can be a read mode (’r’), write mode (’w’) or append mode (’a’). We can also specify whether we are reading, writing, or appending in text mode (’t’) or binary mode (’b’). There are actually many more modes available and help(open) will give you more details about them. By default, open() considers the file to be a ’t’ext file and opens it in ’r’ead mode. In our example, we first open the file in write text mode and use the write method of the file object to write to the file and then we finally close the file.

The above example is from the book “A Byte of Python” by Swaroop C H. swaroopch.com