标签归档:bearing

Python中的Haversine公式(两个GPS点之间的轴承和距离)

问题:Python中的Haversine公式(两个GPS点之间的轴承和距离)

问题

我想知道如何获取2个GPS点之间距离和方位。我研究了haversine配方。有人告诉我,我也可以使用相同的数据找到轴承。

编辑

一切正常,但是轴承还不能正常工作。轴承输出为负,但应在0-360度之间。设定数据应为水平方向,96.02166666666666 且为:

Start point: 53.32055555555556 , -1.7297222222222221   
Bearing:  96.02166666666666  
Distance: 2 km  
Destination point: 53.31861111111111, -1.6997222222222223  
Final bearing: 96.04555555555555

这是我的新代码:

from math import *

Aaltitude = 2000
Oppsite  = 20000

lat1 = 53.32055555555556
lat2 = 53.31861111111111
lon1 = -1.7297222222222221
lon2 = -1.6997222222222223

lon1, lat1, lon2, lat2 = map(radians, [lon1, lat1, lon2, lat2])

dlon = lon2 - lon1
dlat = lat2 - lat1
a = sin(dlat/2)**2 + cos(lat1) * cos(lat2) * sin(dlon/2)**2
c = 2 * atan2(sqrt(a), sqrt(1-a))
Base = 6371 * c


Bearing =atan2(cos(lat1)*sin(lat2)-sin(lat1)*cos(lat2)*cos(lon2-lon1), sin(lon2-lon1)*cos(lat2)) 

Bearing = degrees(Bearing)
print ""
print ""
print "--------------------"
print "Horizontal Distance:"
print Base
print "--------------------"
print "Bearing:"
print Bearing
print "--------------------"


Base2 = Base * 1000
distance = Base * 2 + Oppsite * 2 / 2
Caltitude = Oppsite - Aaltitude

a = Oppsite/Base
b = atan(a)
c = degrees(b)

distance = distance / 1000

print "The degree of vertical angle is:"
print c
print "--------------------"
print "The distance between the Balloon GPS and the Antenna GPS is:"
print distance
print "--------------------"

Problem

I would like to know how to get the distance and bearing between 2 GPS points. I have researched on the haversine formula. Someone told me that I could also find the bearing using the same data.

Edit

Everything is working fine but the bearing doesn’t quite work right yet. The bearing outputs negative but should be between 0 – 360 degrees. The set data should make the horizontal bearing 96.02166666666666 and is:

Start point: 53.32055555555556 , -1.7297222222222221   
Bearing:  96.02166666666666  
Distance: 2 km  
Destination point: 53.31861111111111, -1.6997222222222223  
Final bearing: 96.04555555555555

Here is my new code:

from math import *

Aaltitude = 2000
Oppsite  = 20000

lat1 = 53.32055555555556
lat2 = 53.31861111111111
lon1 = -1.7297222222222221
lon2 = -1.6997222222222223

lon1, lat1, lon2, lat2 = map(radians, [lon1, lat1, lon2, lat2])

dlon = lon2 - lon1
dlat = lat2 - lat1
a = sin(dlat/2)**2 + cos(lat1) * cos(lat2) * sin(dlon/2)**2
c = 2 * atan2(sqrt(a), sqrt(1-a))
Base = 6371 * c


Bearing =atan2(cos(lat1)*sin(lat2)-sin(lat1)*cos(lat2)*cos(lon2-lon1), sin(lon2-lon1)*cos(lat2)) 

Bearing = degrees(Bearing)
print ""
print ""
print "--------------------"
print "Horizontal Distance:"
print Base
print "--------------------"
print "Bearing:"
print Bearing
print "--------------------"


Base2 = Base * 1000
distance = Base * 2 + Oppsite * 2 / 2
Caltitude = Oppsite - Aaltitude

a = Oppsite/Base
b = atan(a)
c = degrees(b)

distance = distance / 1000

print "The degree of vertical angle is:"
print c
print "--------------------"
print "The distance between the Balloon GPS and the Antenna GPS is:"
print distance
print "--------------------"

回答 0

这是Python版本:

from math import radians, cos, sin, asin, sqrt

def haversine(lon1, lat1, lon2, lat2):
    """
    Calculate the great circle distance between two points 
    on the earth (specified in decimal degrees)
    """
    # convert decimal degrees to radians 
    lon1, lat1, lon2, lat2 = map(radians, [lon1, lat1, lon2, lat2])

    # haversine formula 
    dlon = lon2 - lon1 
    dlat = lat2 - lat1 
    a = sin(dlat/2)**2 + cos(lat1) * cos(lat2) * sin(dlon/2)**2
    c = 2 * asin(sqrt(a)) 
    r = 6371 # Radius of earth in kilometers. Use 3956 for miles
    return c * r

Here’s a Python version:

from math import radians, cos, sin, asin, sqrt

def haversine(lon1, lat1, lon2, lat2):
    """
    Calculate the great circle distance between two points 
    on the earth (specified in decimal degrees)
    """
    # convert decimal degrees to radians 
    lon1, lat1, lon2, lat2 = map(radians, [lon1, lat1, lon2, lat2])

    # haversine formula 
    dlon = lon2 - lon1 
    dlat = lat2 - lat1 
    a = sin(dlat/2)**2 + cos(lat1) * cos(lat2) * sin(dlon/2)**2
    c = 2 * asin(sqrt(a)) 
    r = 6371 # Radius of earth in kilometers. Use 3956 for miles
    return c * r

回答 1

这些答案中的大多数都是“环绕”地球的半径。如果您对照其他距离计算器(例如geopy)检查这些,则这些功能将关闭。

这很好用:

from math import radians, cos, sin, asin, sqrt

def haversine(lat1, lon1, lat2, lon2):

      R = 3959.87433 # this is in miles.  For Earth radius in kilometers use 6372.8 km

      dLat = radians(lat2 - lat1)
      dLon = radians(lon2 - lon1)
      lat1 = radians(lat1)
      lat2 = radians(lat2)

      a = sin(dLat/2)**2 + cos(lat1)*cos(lat2)*sin(dLon/2)**2
      c = 2*asin(sqrt(a))

      return R * c

# Usage
lon1 = -103.548851
lat1 = 32.0004311
lon2 = -103.6041946
lat2 = 33.374939

print(haversine(lat1, lon1, lat2, lon2))

Most of these answers are “rounding” the radius of the earth. If you check these against other distance calculators (such as geopy), these functions will be off.

This works well:

from math import radians, cos, sin, asin, sqrt

def haversine(lat1, lon1, lat2, lon2):

      R = 3959.87433 # this is in miles.  For Earth radius in kilometers use 6372.8 km

      dLat = radians(lat2 - lat1)
      dLon = radians(lon2 - lon1)
      lat1 = radians(lat1)
      lat2 = radians(lat2)

      a = sin(dLat/2)**2 + cos(lat1)*cos(lat2)*sin(dLon/2)**2
      c = 2*asin(sqrt(a))

      return R * c

# Usage
lon1 = -103.548851
lat1 = 32.0004311
lon2 = -103.6041946
lat2 = 33.374939

print(haversine(lat1, lon1, lat2, lon2))

回答 2

还有一个向量化的实现,该实现允许使用4个numpy数组代替标量值作为坐标:

def distance(s_lat, s_lng, e_lat, e_lng):

   # approximate radius of earth in km
   R = 6373.0

   s_lat = s_lat*np.pi/180.0                      
   s_lng = np.deg2rad(s_lng)     
   e_lat = np.deg2rad(e_lat)                       
   e_lng = np.deg2rad(e_lng)  

   d = np.sin((e_lat - s_lat)/2)**2 + np.cos(s_lat)*np.cos(e_lat) * np.sin((e_lng - s_lng)/2)**2

   return 2 * R * np.arcsin(np.sqrt(d))

There is also a vectorized implementation, which allows to use 4 numpy arrays instead of scalar values for coordinates:

def distance(s_lat, s_lng, e_lat, e_lng):

   # approximate radius of earth in km
   R = 6373.0

   s_lat = s_lat*np.pi/180.0                      
   s_lng = np.deg2rad(s_lng)     
   e_lat = np.deg2rad(e_lat)                       
   e_lng = np.deg2rad(e_lng)  

   d = np.sin((e_lat - s_lat)/2)**2 + np.cos(s_lat)*np.cos(e_lat) * np.sin((e_lng - s_lng)/2)**2

   return 2 * R * np.arcsin(np.sqrt(d))

回答 3

方位角计算不正确,您需要将输入交换为atan2。

    bearing = atan2(sin(long2-long1)*cos(lat2), cos(lat1)*sin(lat2)-sin(lat1)*cos(lat2)*cos(long2-long1))
    bearing = degrees(bearing)
    bearing = (bearing + 360) % 360

这将为您提供正确的方位。

The bearing calculation is incorrect, you need to swap the inputs to atan2.

    bearing = atan2(sin(long2-long1)*cos(lat2), cos(lat1)*sin(lat2)-sin(lat1)*cos(lat2)*cos(long2-long1))
    bearing = degrees(bearing)
    bearing = (bearing + 360) % 360

This will give you the correct bearing.


回答 4

您可以尝试以下方法:

from haversine import haversine
haversine((45.7597, 4.8422),(48.8567, 2.3508), unit='mi')
243.71209416020253

You can try the following:

from haversine import haversine
haversine((45.7597, 4.8422),(48.8567, 2.3508), unit='mi')
243.71209416020253

回答 5

这是@Michael Dunn给出的Haversine公式的numpy矢量化实现,比大型矢量提高了10-50倍。

from numpy import radians, cos, sin, arcsin, sqrt

def haversine(lon1, lat1, lon2, lat2):
    """
    Calculate the great circle distance between two points 
    on the earth (specified in decimal degrees)
    """

    #Convert decimal degrees to Radians:
    lon1 = np.radians(lon1.values)
    lat1 = np.radians(lat1.values)
    lon2 = np.radians(lon2.values)
    lat2 = np.radians(lat2.values)

    #Implementing Haversine Formula: 
    dlon = np.subtract(lon2, lon1)
    dlat = np.subtract(lat2, lat1)

    a = np.add(np.power(np.sin(np.divide(dlat, 2)), 2),  
                          np.multiply(np.cos(lat1), 
                                      np.multiply(np.cos(lat2), 
                                                  np.power(np.sin(np.divide(dlon, 2)), 2))))
    c = np.multiply(2, np.arcsin(np.sqrt(a)))
    r = 6371

    return c*r

Here’s a numpy vectorized implementation of the Haversine Formula given by @Michael Dunn, gives a 10-50 times improvement over large vectors.

from numpy import radians, cos, sin, arcsin, sqrt

def haversine(lon1, lat1, lon2, lat2):
    """
    Calculate the great circle distance between two points 
    on the earth (specified in decimal degrees)
    """

    #Convert decimal degrees to Radians:
    lon1 = np.radians(lon1.values)
    lat1 = np.radians(lat1.values)
    lon2 = np.radians(lon2.values)
    lat2 = np.radians(lat2.values)

    #Implementing Haversine Formula: 
    dlon = np.subtract(lon2, lon1)
    dlat = np.subtract(lat2, lat1)

    a = np.add(np.power(np.sin(np.divide(dlat, 2)), 2),  
                          np.multiply(np.cos(lat1), 
                                      np.multiply(np.cos(lat2), 
                                                  np.power(np.sin(np.divide(dlon, 2)), 2))))
    c = np.multiply(2, np.arcsin(np.sqrt(a)))
    r = 6371

    return c*r

回答 6

您可以通过添加360°解决负向轴承问题。不幸的是,对于正向轴承,这可能会导致轴承大于360°。这是模运算符的一个很好的候选者,因此总之,您应该添加该行

Bearing = (Bearing + 360) % 360

在您的方法结束时。

You can solve the negative bearing problem by adding 360°. Unfortunately, this might result in bearings larger than 360° for positive bearings. This is a good candidate for the modulo operator, so all in all you should add the line

Bearing = (Bearing + 360) % 360

at the end of your method.


回答 7

默认情况下,atan2中的Y是第一个参数。这是文档。您将需要切换输入以获得正确的方位角。

bearing = atan2(sin(lon2-lon1)*cos(lat2), cos(lat1)*sin(lat2)in(lat1)*cos(lat2)*cos(lon2-lon1))
bearing = degrees(bearing)
bearing = (bearing + 360) % 360

The Y in atan2 is, by default, the first parameter. Here is the documentation. You will need to switch your inputs to get the correct bearing angle.

bearing = atan2(sin(lon2-lon1)*cos(lat2), cos(lat1)*sin(lat2)in(lat1)*cos(lat2)*cos(lon2-lon1))
bearing = degrees(bearing)
bearing = (bearing + 360) % 360

回答 8

请参阅此链接:https : //gis.stackexchange.com/questions/84885/whats-the-difference-between-vincenty-and-great-circle-distance-calculations

这实际上给出了两种获取距离的方法。他们是Haversine和Vincentys。通过研究,我发现Vincentys相对准确。也可以使用import语句来执行。

Refer to this link :https://gis.stackexchange.com/questions/84885/whats-the-difference-between-vincenty-and-great-circle-distance-calculations

this actually gives two ways of getting distance. They are Haversine and Vincentys. From my research I came to know that Vincentys is relatively accurate. Also use import statement to make the implementation.


回答 9

这是两个用于计算距离和方位的函数,它们基于先前消息和https://gist.github.com/jeromer/2005586中的代码(为清晰起见,为lat,lon格式添加了地理点的元组类型,这两个函数都为清楚起见)。我测试了两个功能,它们似乎正常工作。

#coding:UTF-8
from math import radians, cos, sin, asin, sqrt, atan2, degrees

def haversine(pointA, pointB):

    if (type(pointA) != tuple) or (type(pointB) != tuple):
        raise TypeError("Only tuples are supported as arguments")

    lat1 = pointA[0]
    lon1 = pointA[1]

    lat2 = pointB[0]
    lon2 = pointB[1]

    # convert decimal degrees to radians 
    lat1, lon1, lat2, lon2 = map(radians, [lat1, lon1, lat2, lon2]) 

    # haversine formula 
    dlon = lon2 - lon1 
    dlat = lat2 - lat1 
    a = sin(dlat/2)**2 + cos(lat1) * cos(lat2) * sin(dlon/2)**2
    c = 2 * asin(sqrt(a)) 
    r = 6371 # Radius of earth in kilometers. Use 3956 for miles
    return c * r


def initial_bearing(pointA, pointB):

    if (type(pointA) != tuple) or (type(pointB) != tuple):
        raise TypeError("Only tuples are supported as arguments")

    lat1 = radians(pointA[0])
    lat2 = radians(pointB[0])

    diffLong = radians(pointB[1] - pointA[1])

    x = sin(diffLong) * cos(lat2)
    y = cos(lat1) * sin(lat2) - (sin(lat1)
            * cos(lat2) * cos(diffLong))

    initial_bearing = atan2(x, y)

    # Now we have the initial bearing but math.atan2 return values
    # from -180° to + 180° which is not what we want for a compass bearing
    # The solution is to normalize the initial bearing as shown below
    initial_bearing = degrees(initial_bearing)
    compass_bearing = (initial_bearing + 360) % 360

    return compass_bearing

pA = (46.2038,6.1530)
pB = (46.449, 30.690)

print haversine(pA, pB)

print initial_bearing(pA, pB)

Here are two functions to calculate distance and bearing, which are based on the code in previous messages and https://gist.github.com/jeromer/2005586 (added tuple type for geographical points in lat, lon format for both functions for clarity). I tested both functions and they seem to work right.

#coding:UTF-8
from math import radians, cos, sin, asin, sqrt, atan2, degrees

def haversine(pointA, pointB):

    if (type(pointA) != tuple) or (type(pointB) != tuple):
        raise TypeError("Only tuples are supported as arguments")

    lat1 = pointA[0]
    lon1 = pointA[1]

    lat2 = pointB[0]
    lon2 = pointB[1]

    # convert decimal degrees to radians 
    lat1, lon1, lat2, lon2 = map(radians, [lat1, lon1, lat2, lon2]) 

    # haversine formula 
    dlon = lon2 - lon1 
    dlat = lat2 - lat1 
    a = sin(dlat/2)**2 + cos(lat1) * cos(lat2) * sin(dlon/2)**2
    c = 2 * asin(sqrt(a)) 
    r = 6371 # Radius of earth in kilometers. Use 3956 for miles
    return c * r


def initial_bearing(pointA, pointB):

    if (type(pointA) != tuple) or (type(pointB) != tuple):
        raise TypeError("Only tuples are supported as arguments")

    lat1 = radians(pointA[0])
    lat2 = radians(pointB[0])

    diffLong = radians(pointB[1] - pointA[1])

    x = sin(diffLong) * cos(lat2)
    y = cos(lat1) * sin(lat2) - (sin(lat1)
            * cos(lat2) * cos(diffLong))

    initial_bearing = atan2(x, y)

    # Now we have the initial bearing but math.atan2 return values
    # from -180° to + 180° which is not what we want for a compass bearing
    # The solution is to normalize the initial bearing as shown below
    initial_bearing = degrees(initial_bearing)
    compass_bearing = (initial_bearing + 360) % 360

    return compass_bearing

pA = (46.2038,6.1530)
pB = (46.449, 30.690)

print haversine(pA, pB)

print initial_bearing(pA, pB)