如何跳转到巨大文本文件中的特定行？

Are there any alternatives to the code below:

startFromLine = 141978 # or whatever line I need to jump to

urlsfile = open(filename, "rb", 0)

linesCounter = 1

for line in urlsfile:
    if linesCounter > startFromLine:
        DoSomethingWithThisLine(line)

    linesCounter += 1

If I’m processing a huge text file (~15MB) with lines of unknown but different length, and need to jump to a particular line which number I know in advance? I feel bad by processing them one by one when I know I could ignore at least first half of the file. Looking for more elegant solution if there is any.

linecache:

The linecache module allows one to get any line from a Python source file, while attempting to optimize internally, using a cache, the common case where many lines are read from a single file. This is used by the traceback module to retrieve source lines for inclusion in the formatted traceback…

You can’t jump ahead without reading in the file at least once, since you don’t know where the line breaks are. You could do something like:

# Read in the file once and build a list of line offsets
line_offset = []
offset = 0
for line in file:
    line_offset.append(offset)
    offset += len(line)
file.seek(0)

# Now, to skip to line n (with the first line being line 0), just do
file.seek(line_offset[n])

You don’t really have that many options if the lines are of different length… you sadly need to process the line ending characters to know when you’ve progressed to the next line.

You can, however, dramatically speed this up AND reduce memory usage by changing the last parameter to “open” to something not 0.

0 means the file reading operation is unbuffered, which is very slow and disk intensive. 1 means the file is line buffered, which would be an improvement. Anything above 1 (say 8k.. ie: 8096, or higher) reads chunks of the file into memory. You still access it through for line in open(etc):, but python only goes a bit at a time, discarding each buffered chunk after its processed.

I’m probably spoiled by abundant ram, but 15 M is not huge. Reading into memory with readlines() is what I usually do with files of this size. Accessing a line after that is trivial.

I am suprised no one mentioned islice

line = next(itertools.islice(Fhandle,index_of_interest,index_of_interest+1),None) # just the one line

or if you want the whole rest of the file

rest_of_file = itertools.islice(Fhandle,index_of_interest)
for line in rest_of_file:
    print line

or if you want every other line from the file

rest_of_file = itertools.islice(Fhandle,index_of_interest,None,2)
for odd_line in rest_of_file:
    print odd_line

Since there is no way to determine the lenght of all lines without reading them, you have no choice but to iterate over all lines before your starting line. All you can do is to make it look nice. If the file is really huge then you might want to use a generator based approach:

from itertools import dropwhile

def iterate_from_line(f, start_from_line):
    return (l for i, l in dropwhile(lambda x: x[0] < start_from_line, enumerate(f)))

for line in iterate_from_line(open(filename, "r", 0), 141978):
    DoSomethingWithThisLine(line)

Note: the index is zero based in this approach.

If you don’t want to read the entire file in memory .. you may need to come up with some format other than plain text.

of course it all depends on what you’re trying to do, and how often you will jump across the file.

For instance, if you’re gonna be jumping to lines many times in the same file, and you know that the file does not change while working with it, you can do this:
First, pass through the whole file, and record the “seek-location” of some key-line-numbers (such as, ever 1000 lines),
Then if you want line 12005, jump to the position of 12000 (which you’ve recorded) then read 5 lines and you’ll know you’re in line 12005 and so on

If you know in advance the position in the file (rather the line number), you can use file.seek() to go to that position.

Edit: you can use the linecache.getline(filename, lineno) function, which will return the contents of the line lineno, but only after reading the entire file into memory. Good if you’re randomly accessing lines from within the file (as python itself might want to do to print a traceback) but not good for a 15MB file.

What generates the file you want to process? If it is something under your control, you could generate an index (which line is at which position.) at the time the file is appended to. The index file can be of fixed line size (space padded or 0 padded numbers) and will definitely be smaller. And thus can be read and processed qucikly.

• Which line do you want?.
• Calculate byte offset of corresponding line number in index file(possible because line size of index file is constant).
• Use seek or whatever to directly jump to get the line from index file.
• Parse to get byte offset for corresponding line of actual file.

I have had the same problem (need to retrieve from huge file specific line).

Surely, I can every time run through all records in file and stop it when counter will be equal to target line, but it does not work effectively in a case when you want to obtain plural number of specific rows. That caused main issue to be resolved – how handle directly to necessary place of file.

I found out next decision: Firstly I completed dictionary with start position of each line (key is line number, and value – cumulated length of previous lines).

t = open(file,’r’)
dict_pos = {}

kolvo = 0
length = 0
for each in t:
    dict_pos[kolvo] = length
    length = length+len(each)
    kolvo = kolvo+1

ultimately, aim function:

def give_line(line_number):
    t.seek(dict_pos.get(line_number))
    line = t.readline()
    return line

t.seek(line_number) – command that execute pruning of file up to line inception. So, if you next commit readline – you obtain your target line.

Using such approach I have saved significant part of time.

You may use mmap to find the offset of the lines. MMap seems to be the fastest way to process a file

example:

with open('input_file', "r+b") as f:
    mapped = mmap.mmap(f.fileno(), 0, prot=mmap.PROT_READ)
    i = 1
    for line in iter(mapped.readline, ""):
        if i == Line_I_want_to_jump:
            offsets = mapped.tell()
        i+=1

then use f.seek(offsets) to move to the line you need

Do the lines themselves contain any index information? If the content of each line was something like “<line index>:Data“, then the seek() approach could be used to do a binary search through the file, even if the amount of Data is variable. You’d seek to the midpoint of the file, read a line, check whether its index is higher or lower than the one you want, etc.

Otherwise, the best you can do is just readlines(). If you don’t want to read all 15MB, you can use the sizehint argument to at least replace a lot of readline()s with a smaller number of calls to readlines().

If you’re dealing with a text file & based on linux system, you could use the linux commands.
For me, this worked well!

import commands

def read_line(path, line=1):
    return commands.getoutput('head -%s %s | tail -1' % (line, path))

line_to_jump = 141978
read_line("path_to_large_text_file", line_to_jump)

Here’s an example using ‘readlines(sizehint)’ to read a chunk of lines at a time. DNS pointed out that solution. I wrote this example because the other examples here are single-line oriented.

def getlineno(filename, lineno):
    if lineno < 1:
        raise TypeError("First line is line 1")
    f = open(filename)
    lines_read = 0
    while 1:
        lines = f.readlines(100000)
        if not lines:
            return None
        if lines_read + len(lines) >= lineno:
            return lines[lineno-lines_read-1]
        lines_read += len(lines)

print getlineno("nci_09425001_09450000.smi", 12000)

None of the answers are particularly satisfactory, so here’s a small snippet to help.

class LineSeekableFile:
    def __init__(self, seekable):
        self.fin = seekable
        self.line_map = list() # Map from line index -> file position.
        self.line_map.append(0)
        while seekable.readline():
            self.line_map.append(seekable.tell())

    def __getitem__(self, index):
        # NOTE: This assumes that you're not reading the file sequentially.  
        # For that, just use 'for line in file'.
        self.fin.seek(self.line_map[index])
        return self.fin.readline()

Example usage:

In: !cat /tmp/test.txt

Out:
Line zero.
Line one!

Line three.
End of file, line four.

In:
with open("/tmp/test.txt", 'rt') as fin:
    seeker = LineSeekableFile(fin)    
    print(seeker[1])
Out:
Line one!

This involves doing a lot of file seeks, but is useful for the cases where you can’t fit the whole file in memory. It does one initial read to get the line locations (so it does read the whole file, but doesn’t keep it all in memory), and then each access does a file seek after the fact.

I offer the snippet above under the MIT or Apache license at the discretion of the user.

Can use this function to return line n:

def skipton(infile, n):
    with open(infile,'r') as fi:
        for i in range(n-1):
            fi.next()
        return fi.next()